Command Prompt Commands Computer Network

COMMANDS COMMAND PROMPT COMPUTER NETWORK
Here are the commands in the Command Prompt related to computer networks.
To perform these commands you must enter the Command Prompt (Click Start -> Run -> Type CMD)
1. ipconfig / all
Displays the connection configuration information, such as Host Name, Primary DNS Type, Ethernet LAN Adapter.
2. ipconfig / flushdns
Delete a DNS Cache
3. ipconfig / release
"Removing" all IP Address connections.
4. ipconfig / renew
Create a new IP address for a particular adapter.
5. ipconfig / displaydns
Displays the DNS cache.
6. ipconfig / registerdns
To refresh the DNS and re-register the DNS connection.
7. ipconfig / showclassid
Displays the DHCP class information.

8. ipconfig / setclassid
Change the DHCP Class ID
9. control netconnections
Displaying Network Connection.
10. nslookup
Know the ip address address of the domain name in the write
11. netstat
Displays information TCP / IP connection is currently active.
12. route
Displays the local route.
13. hostname
Displays the computer name.
14. ping
Example: ping www.finderonly.com
Do a test connection to the site www.finderonly.com.
The less% of his loss the better the connection.
15. tracert
Displays IP Address